C2858-60021 cutter mechanism assembly HP DesignJet 600 / 700 series plotter  - Auto cutter for roll feed paper oem new

C2858-60021 cutter assembly New Genuine OEM for Hewlett-Packard plotter and wide format printer. Cutter has been discontinued by the manufacturer, limited quantity of new units still in stock.

See the following documents for assistance with troubleshooting and repair:

Designjet 700 Printers - Switch Power Off Check Cartridge Path
Designjet 700 Series Printers - Noise Along the Carriage Path, General Y-Axis Troubleshooting
Designjet 750C Plus Series Printers - Switch Power Off Check Cartridge Path 
Designjet 755CM Series Printers - Switch Power Off Check Cartridge Path

Cutter Assembly used in these DesignJet models listed below.
DesignJet 600 (D-size) C2847A
DesignJet 600 (E-size) C2848A 
DesignJet 650C (D-size) C2858A C2858B
 DesignJet 650C (E-size) C2859A C2859B 
DesignJet 650C/PS (36-inch/Postscript) C3792A
DesignJet 650C/PS (24-inch/Postscript) C3791A
DesignJet 700 (24-inch) C4705B
DesignJet 700 (36-inch) C4706B C4706BR
DesignJet 700 (D-size) C4705A
DesignJet 700 (E-size) C4706A
DesignJet 750C (D-size) C3195A
DesignJet 750C (E-size) C3196A
DesignJet 750CPlus (24-inch) C4708B C4708BR
DesignJet 750CPlus (36-inch) C4709B C4709BR
DesignJet 750CPlus (D-size) C4708A
DesignJet 750CPlus + (E-size) C4709A
DesignJet 755CM (E-size) C3198A C3198B C3198BR
DesignJet-C1633A C1633A
DesignJet-C1633B C1633B
Kodak Digital Science 1000PS C4710A

New OEM HP Part Requires NO Exchange of Old Part.

c285860021